To say the cobwebs were blown out would be an understatement, check out this angry Nitromethane fuelled funnycar make a hit as Emma gets ready to battle it out in the upcoming Nitro Max Series at the Perth Motorplex – with Round One kicking of this Saturday the 11th December!

There’s somewhat of an ominious presence when these cars roll up to stage, as they crank the fuel tap wide open and you hear that distinct nitro cackle go almost silent as the motor loads up and the revs pull down, and then all hell breaks loose!

If you haven’t got your tickets for Round One yet, make sure to get a move on and come down and see some of the wildest cars and racing the sport has to offer.

You can also catch all the action on Nitro action from this season on the Speed Torque Youtube Channel, we’ve been selected by the guys to do what we do best and provide the best content from on and off the track for your viewing pleasure!

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #FullBOOST #Begley #DarkKnight#NitroFunnyCar #PerthMotorplex #OutlawNitro #Funnycar #TopFuel #NitroMax

We’ve seen the interest from you guys in the last few big tyre’d blown car videos we have put up, so thought it would be a wise move to continue capturing these wild rides at each event.

This event did not disappoint, with summer now here in Perth Western Australia track conditions were hot! With the surface temp in excess of 50 degrees celsius and ambient into the mid 30’s, it made for some hot action and some insane door car passes.

One of our favourite door cars made an appearance in Pino Priolo and his 1937 Chevrolet Couple Top Doorslammer, this car is bad to the bone and commands attention when it rolls out from under the bridge!

Turn it up as they don’t get much angrier than this outside of the Nitromethane classes!

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #ZapsRat #Dragster #Doorslammer #FullBOOST #Gregorini #Priolo #AlanMankoph #SuperchargedOutlaw #TopDoorslammer #JohnZappia #Zappia

Please subscribe guys it really helps me out 🙂

In this Episode we do a full weekend racing at Philip island straight off the back of our day at Broadford with Lyne Motorsport, and it was sick.

The Nugget project is supported by the legends at Redline Oils, RG customs, Ryan Lee Graphics, Delta V Technologies, Get Parts, Uneek Bending, Luxe Performance and One Gauge.

Don’t forget to like us on Facebook and join the Nugget Project workshop group and check us out on Instagram

facebook.com/thenuggetproject

instagram: @the_nugget_project

www.thenuggetproject.com

We headed down on the Saturday for Day Two of the 47th GoldenStates Championship at the Perth Motorplex, we couldn’t get down for the qualifying rounds on the Friday but there was plenty of action left to see.

We saw a good size field of OLR for this round, with your favourite cars back down at the track and also with Phil Gardiner bringing his insane VS Maloo down to go head to head with the regulars!

Tim was back in the WILD wheelstanding 12A Turbo Rotary Datsun Ute, Ben brought his SOHC powered rocketship Mustang down to play along with Kev’s no nonsense Big Block Turbo Trans AM plus the DS Racing Foxbody and the Begleys Twin Turbo One Tonner.

The track was a challenge with the surface temp well above 50 degrees celcius and ambient temp in the mid 30’s, summer has definitely arrived over here in Perth Western Australia!

As always, be sure to like and share the videos, get those comments in and most importantly SUBSCRIBE to the channel!! Hit that bell and we’ll keep the content coming your way…

Jump over and check out our merch store (link is below) where you can pick yourself up some stickers, hats, shirts, jumpers and a bunch of other awesome gear to deck yourself out in and also support and help us promote what we do all at the same time!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #FullBOOST #Rotary #12A #Pineapple #SOHC #Mustang #TwinTurboTonner #MumboTransAM #PhilGardiner #Begley

Video Segments:
0:00 #BRC Intro
0:12 Fourth Qualifier
1:41 Fifth Qualifier
3:29 First Race Round
5:57 Second Race Round
8:03 Third Race Round
9:50 Final Round
11:47 #BRC Outro

Please subscribe guys it really helps me out 🙂

In this Episode we go to the very first Lyne Motorsport track day at Broadford, and it was rad!

The Nugget project is supported by the legends at Redline Oils, RG customs, Ryan Lee Graphics, Delta V Technologies, Get Parts, Uneek Bending, Luxe Performance and One Gauge.

Don’t forget to like us on Facebook and join the Nugget Project workshop group and check us out on Instagram

facebook.com/thenuggetproject

instagram: @the_nugget_project

www.thenuggetproject.com

Saturday 27th November sees the final Nishi-D event of 2021 however the crew behind the Nishi-D event have decided to keep the car vibes going with a new event called the “Exciting Car Showdown”.  A joint venture between Nishi-D crew and Drift Bunny the event will kick

Please subscribe if you already haven’t! thanks gang 🙂

In this Episode we talk about my race comms system

The Nugget project is supported by the legends at Redline Oils, RG customs, Ryan Lee Graphics, Delta V Technologies, Get Parts, Uneek Bending, Luxe Performance and One Gauge.

Don’t forget to like us on Facebook and join the Nugget Project workshop group and check us out on Instagram

facebook.com/thenuggetproject

instagram: @the_nugget_project

www.thenuggetproject.com

Anthony Page made the last minute decision to attend Narrogin Revheads but was without parts needed to complete his engine, over a few beers his cousin came to the rescue with an old Cast Headed 383 Chev, with a heap of mismatched parts and his Blower set-up the combo still rattled off 700rwhp and Pagey then went on to put the combo to the ultimate test with 3 Burnouts at Revheads.