Browsing: Videos

COMMODORE UTE ‘ SPINEM2.0″ AT BRASHERNATS

COMMODORE “VXWEPN” AT BRASHERNATS

COMMODORE “SPARES” AT BRASHERNATS (Showers the Camera in Rubber)

One car we really wanted to do a full feature on last season but didn’t quite get to is this one, Connor’s Nardo Grey HZ One Tonner which regularly raced throughout the 2020/21 Outlaw Radial Season at the Perth Motorplex.

If you’ve been watching the channel for a while this ute is probably familiar to you as you would have seen it in action before, but what’s now under the hood is different to what you are used to seeing! The LSA Blower combo has been stepped up some – Now you will find a pair of Precision Journal Bearing Turbo’s in it’s place, courtesy of Lundy Race Fabrication. The rear end has also had a birthday with Black Magic literally working thier magic on a whole bunch of trick custom upgrades to make sure this car can get all that power down and some!

Power Management is taken care of by the Holley EFI Master – Jeff Johnson, going through the motions and slowly creeping up on the power each time after checking over the data.

We’ll make sure to jump in this at the first available opporutnity as soon as it hits the track, we suspect it’s going to be a little more spicy than the last time we watched it run laps.

In the meantime we hope you enjoy the sights and sounds of the Tonner on the WA Racing Developments Mainline Pro Hub Dyno as it slowly gets turned up!

Build Specs:

Engine – LS3 Alloy Block 417ci
Heads – LSA Unported
Rotating Assembly – Callies Compstar Crank and Rods, CP Bullet 4.075″ Pistons
Camshaft – Custom John Bewley Hydraulic Roller
Turbos – Twin Precision 6266 Journal Bearings
Fuel – E85
Intake – Stock LS3
Injectors and Fuel System – Bosch 1650cc, Magnafuel Pro Tuner 750 Pump, Aeromotive -10 Regulator
Gearbox/Converter/Driveline – LSX Powertrain Built T400, FTC Convertor
Diff – 9″, Mark Williams 3.25:1 Centre, 35 Spline Axles
Wheels and Tires – Weld Magnum 15×4 Front, 15×10 Beadlock Rear currently with 315/60/15 Pro Radials (Soon to be 275’s)
Suspension – Custom 4-Link Rear End by Black Magic Race Cars with AFCO Big Gun Radial Shocks, Standard Front
ECU – Holley EFI HP
Power Figure – 1136rwhp @ 22psi
Tuned by – Mr Holley EFI (Jeff Johnson)

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #HZ #Tonner #FullBOOST #BlackMagicRaceCars #LundyRaceFab #PrecisionTurbo #LStheWorld #WARacingDevelopments #MainlineDyno

We know how much you guys like these dyno videos, so we were pretty happy to be invited down by Kurt and Jeff from Torqhub to do our thing and capture this ultra tough XY make a couple of hits!

The numbers it drove away with were huge, with Wayne from Performance Carb Tuning confident that’s more than enough to get this 70’s street car into the 8’s!

Jeff and Kurt have supported us from very early on in what we do, and we absolutely love working with these guys and are privileged to call them our mates – make sure you go and check out their channel as they have some awesome local content going on and they’re very easy to watch… You might learn a thing or two aswell!

You can check out their channel below, where they’ve also got build videos of this XY on there too!
https://www.youtube.com/channel/UCJLoadE82XOEuhEzMyUON5Q

Build Specs:

Engine – 411ci World Block Windsor
Heads – Edelbrock Victor Jr. CNC
Rotating Assembly – Scat 4340 Crank, Eagle H-Beam Rods, JE Forged Pistons
Camshaft – Custom Hydraulic Roller
Carby – Custom Quickfuel 950cfm by Performance Carb Tuning
Supercharger – Procharger F1R
Fuel – Pump E85
Intake – Edelbrock Super Victor
Fuel System – Magnafuel 750 Pro Tuner
Gearbox/Converter/Driveline – TH400, TCE Custom Converter – 3800 Stall
Diff – 9″ w/ 3.5:1 gears
Wheels and Tires – Centerline Convo Pro. 255/60R15 Radial
Suspension – Stock
ECU – MSD 6530
Power Figure – 770hp
Built by – Torq Hub
Tuned by – Wayne @ Performance Carb Tuning

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #XYGT #Falcon #FullBOOST #Torqhub #PerformanceCarbTuning #Procharger #MainlineDyno

Everytime we have seen this car come out it never fails to deliver in the excitement department, it’s an epic combo and those huge wheelstands make for awesome video and stills!

We would have been more than happy to leave with an awesome video of another massive wheelstand and a clean A-B Pass , instead things very quickly went south with the car getting out of the groove and rapidly coming back around – what happened next you will have to watch and see, but it’s never a great thing to see anyone come unstuck during the pass!

Can’t wait to see the car back again, Black Magic Racecars have been putting in the hours to get the car to become a little more controlled and get down quicker than ever – It definitely looks like it has more in it so we hope to be able to see just how much again very soon!

Build Specs:

Engine – Toyota 2JZ
Heads – Toyota
Rotating Assembly – R&R Rods, CP Pistons, Toyota crankshaft
Camshaft – Crower
Turbo & PSI – Precision 88/91 40psi
Fuel – Methanol
Intake – Hypertune
Injectors and Fuel System – 18 Injectors, Enderle 110 pump
Gearbox/Converter – 2 Speed Powerglide, FTC Bolt Together Converter
Driveline – DSS (Drive Shaft Shop) Carbon Fibre Driveshaft
Diff – Final Drive Sheet Metal Housing, Strange HD Ali Centre, Strange 35 Spline Axles
Wheels and Tires – Weld Alumastar Wheels, 275 MT Radial Pro
Suspension – Strange Double Adjustable Rear Shocks
ECU – Haltech
Power Figure – 1100hp
Tuned by – Michael Buckley (Rotomotion)
Personal Best ET – 8.02 @169mph with a 1.29 60ft

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #2JZ #2J #2JZNo$hit #Torana #BlackMagicRaceCars #Rotomotion #HELLJ #LJ #FullBOOST #BroomysGarage

KA-CHOW!!! BLOWN 370Z NISSAN BURNOUT CAR

At the June race meet held at Wanneroo Raceway a couple of weeks ago, we grabbed as many spare cameras as we had and loaded Nick’s car up!

Nick at only 21, started out in karting at just 7 years of age! He transitioned over to cars at the age of 14 and already has racked up an impressive racing career comprising of 2 Years Excel 2015 State Champ, 2 Years Formula Ford and 4 years ago moved into racing the BMW in which he has already taken out the IPC Outright State Champion back in in 2019.

He is awesome to watch in his office, and he is looked up to by many other younger racers which he coaches and mentors.

For only 3.2L of Straight Six BMW Naturally Aspirated M Power up front, this car moves out!

The onboard Motec tuned by Mike (WA Racing Developments) handles the engine vitals and datalogging and gives Nick the information in real time he needs to get the most out of the car.

The genuine M3 is definitely is strong competition for the other bigger and more powerful cars out on the track, with Nick able to outbrake and outcorner his competitors on more than one occasion.

Turn the volume up and listen to this symphony of the BMW powerplant coupled with the unreal sounds of the Samsonas 6 Speed Dog Box!

Build Specs:

Car Year/Model – 1996 E36 M3
Engine – S54 3.2 Litre, All Stock
Fuel – E85
Gearbox/Driveline – 6 Speed Samsonas Dog box
Diff – Kaaz
ECU – Motec M130 PDM 15
Wheels and Tires – Koya Racing Wheels with AO 50 Tyres
Brakes – Tilton Pedal Box, Wilwood Brakes with AP Racing Discs
Suspension – BC Coilovers
Power – 322HP (E85)
Tuned by – Mike (WA Racing Developments)
Personal Best Track Time – 1.01.5

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #NickMiticMotorsport #BMWM3 #E36 #ImprovedProductionRacing #WARacingDevelopments

Video Segments:
0:00 #BRC Intro
2:03 Qualifying
13:16 Race One
23:22 Race Two
37:56 Race Three
46:33 #BRC Outro

Tyson brought his very tidy looking VK down to get some seat time in the car since it was put together.

Under the hood of this Commodore is serious business, with a host of trick parts getting the job done!

With a few runs on the board and confidence in the car and power level building, we look forward to seeing the car back again to really get after it and see what numbers it can bring to the table!

Build Specs below:

VK Commodore
Engine – 400ci LS2 Block
Heads – LS3
Intake – Stock GM
Turbo – Twin 6466 Precision 66mm
Rotating Assembly – C.O.M.E 4” Crank, Callies Rods, Wiseco pistons
Camshaft – LJMS
Fuel – E85
Fuel System – 75L Fuel Cell with Two Walbro 525 Pumps
Gearbox – 2 Speed Powerglide, TCE Converter
Driveline – Stock VL Tailshaft
Diff – 9” with 3.25 gears
Wheels and Tires – 255 Radials
Suspension – Mostly Stock with pro9 Arms
ECU – Holley HP
Power Figure – 1160rwhp
Tuned by – Jeff Johnson @ Streetbuilt Racing

Be sure to like and share the video, get those comments in and most importantly SUBSCRIBE to the channel, hit that bell and we’ll keep the content coming your way…

Also jump over and check out our merch store (link below) where you can pick yourself up some stickers, hats, shirts, jumpers, shorts and a bunch of other awesome gear to deck yourself out in!

SHOP
https://www.becauseracecarshop.com.au/

Thanks as always for watching 🙂

#BecauseRacecar #YouTube #Trending #LundyRaceFab #FullBOOST #StreetbuiltRacing

LS1 HILUX “YEA BOY” AT BRASHERNATS